If the data transfer to the clients does not work, this may be due to the following reasons:
The folder specified for the client files is not cleared for network access. Solution: Clear the folder or the drive for network access.
The presentation network is not configured correctly. Solutions:
Check the settings under Options – Project Options – Network.
The displays have no or no correct IP address. See Configuring the presentation network.
Automatically obtained IP addressed in particular may causes problems as they can change any time the system is started up again. ...This is how you change your computer to static IP addresses. When you change the network configuration on the clients you may have to restart Wings Vioso RX on the master for the altered configuration to be detected.