SC MASTER units have a number of interfaces which can be used for SC Net operation. Usually, the interfaces and control channels are configured with their correct address when they are added to the Media Pool. See also Adding SC Net modules. If you want to add ports at a later time, you need to use the following addresses:
Display /2 ...information on how messages are output can be found Displaying information on the SC Master display.
DMX or DALI /3 and up (up to 64 DMX channels, output to the REMOTE connector)
Switch outputs /70 and /71 (two open-collector outputs at the REMOTE connector)
Switch outputs /70, /71, /72 and /73 (four AUX relays, for SC Master 2M/4M only)
RS232 /90 (RS232-OUT connector)
RS232 /91 (RS232-IN/CAN connector)
The SC Net unit address must be added to the complete address, e.g. 1/90.
See also