In the Media Pool, new ports and/or control channels can be added to the existing SC Net port (or DLC Port).
Click category Devices in the Media Pool.
Right-click the device port Stumpfl SC Net or Stumpfl DLC or a device folder and select Add devices...
If you want to arrange the devices in the Media Pool according to certain functions, you should start by creating a device folder followed by creating the new control channels in this particular folder. See Adding device folders.
In the dialog box Add device popping up place a checkmark next to the corresponding control channels or ports and enter the required number. You can select several control channels and ports (type and number).
For an SC Net port, you need to enter the device address of the module at SC Net address. The SC Net subaddresses are automatically counted up by Wings Vioso RX, starting from the first address available.
Finish adding devices by clicking on OK.
It may be useful to name the control channels appropriately, e.g. "Room illumination", "Spot left", "Filter blue", etc. Right-click the control channel, select Properties and enter the corresponding Name. As an alternative, the Properties Dialog can also be opened by double-clicking the corresponding device.
Important: For the devices to be addresses via the specified control channels, the addresses in the Media Pool must correspond to those set at the hardware. If necessary, correct the addresses. See also Configuring the SC Net system.
It is also possible to add entire SC Net modules including all their resources. See Adding SC Net modules.
If you are using a Stumpfl DLC port and want to control via DMX, you need to choose 0 – 10 Volts. For DLC, control information is output both as DMX and 0 – 10 Volts in parallel.
You can link up an object with a number of control channels by highlighting the corresponding control channels in the Media Pool and dragging them all simultaneously into the timeline.
A control channel can now be assigned to a number of objects simultaneously by highlighting the corresponding objects before dragging the control channel onto one of these objects.
You can drag several devices or control channels into the timeline in one go while and create a separate track for every individual device by pressing the Shift key while releasing the mouse key.
See also