This function requires the Pro License or higher (not available for additional licenses). See also Licenses and functions.
If you want to read and send timecode from LaserAnimation SOLLINGER GmbH systems in order to sync Wings Vioso you need a device port for Net Timecode that is applied via a standard network connection.
In the Media Pool click on category Devices.
In the right Media Pool portion right-click some free space and select Add port Net Timecode.
This dialog allows the following timecode settings:
Mode ...defines whether Net Timecode is read (Timecode receiver) or sent (Timecode sender).
Offset ...offset between the timecode read and playback in the timeline.
Timeout ...defines the period of time that Wings Vioso continues playback after timecode has stopped .
After timecode ...here you can define the activity to be performed after timecode has stopped.
Note: The last two options are only effective during timecode reading.
Close the dialog by clicking OK.
See also
Master Mode with SMPTE timecode
Slave Mode with SMPTE timecode