When an application is to be exclusively run from a PC with Wings Vioso RX, you can connect SC Net Modules directly to a serial port on your PC. This requires the following:
Every SC Net Module requires a separate serial port at the computer. Cascading of several SC Net Modules is not possible without SC Master unit.
Connection of the serial port of the computer to the IN socket of the SC Net Module is via the cable SCK-N_PC. This cable is also used for firmware update of SC Net Modules. Every SC Net Module requires a separate power supply unit.
The PC Baud rate for the SC Net port must be reduced to 9600 Bauds. ... See Configuring an SC Net port. Please bear in mind that the reduced Baud rate restricts the number of devices that can be controlled simultaneously.
See also