This error message is not issued by Wings Vioso RX but by Windows and means that your sound card is not able to output the set audio format. When such a message comes up, the sound card inputs or outputs may have been set incorrectly.
Possible reasons for this error message while playing back:
Some sound cards also feature modem outputs. When such a modem output has been selected, audio playback in Wings Vioso RX fails.
You wanted to utilize multi-channel output for Wings Vioso RX and have accidentally chosen the same audio output more than once.
Solution: Go to Extras – Options – Global Options – Sound cards and select different outputs.
The sound card or its drivers cause problems. To verify this, make the following test:
Open the Timeline Properties and select Synchronization with PC clock. Audio playback is now virtually off.
Save the project and check whether there are still error messages. If no more error message appears you can say that the problem was caused by sound card or driver. Try first to install a new driver for the sound card. If this does not remedy the problem replace the sound card.
Important: Do not forget to change Synchronization in the Timeline Properties back to Audio.
Possible reasons for this error message while recording:
You have chosen a wrong input in the Record Dialog.
Solution: In the Record dialog, choose a different input.
In the Record Dialog a digital input was selected which has not received a valid audio signal yet. or the sampling rate does not correspond with that set in the Record dialog.
Solution: Supply a valid audio signal to the digital input of your sound card. In the Record dialog select the sampling rate in accordance with the signal supplied.