If after inserting the CF Card message "No Show.ini File" is displayed on the SD Event Control or SC Master unit, file Show.ini can't be read by these units. In principle, this may have the following reasons:
The CF card is empty or Show.ini is not available.
Solution: Copy the presentation data onto CF Card. . ...This is how it is done.
The CF Card was formatted using the FAT32 file system.
Solution: Format the CF Card using the FAT16 file system. In the Windows Explorer, right-click the CF Card, followed by Format... Select file system FAT and format the CF Card. Then copy the presentation data onto CF Card. ...This is how it is done.
Show.ini is not compatible with the device or the firmware, which may be caused by wrong settings in the SC Net options.
Solutions:
Update the firmware. Refer to the device documentation.
Set the number of shows and remote inputs back to 120. See Options - Project Options - SC Net.