Configuration SC LAN Remote 8 in

This function requires the Advanced License and up or the Show Control Module. See Licenses and functions.

SC LAN Remote 8 in offers 8 switching inputs for executing trigger actions.  It can only be used if its IP address lies within the Wings Vioso RX computer address space. Instructions on how to set the IP address can be found in the SC LAN Module operating instructions.

1. Click category Devices in the Media Pool.

2. Right-click some free space in the Media Pool portion and select Stumpfl SC LAN SC LAN remote 8 in.

3. Enter the module IP address. If you do not know the IP address, you can use our software Iseo Designer to find out about it or alter it if necessary. If you want to alter the last address group only, click Network to do so directly.

4. Close the dialog by clicking OK.

5. In the Media Pool on the left under Devices click SC LAN Remote 8 in to highlight the device port.

6. Right-click the right Media Pool section and select Add devices.

7. Place a checkmark next to Switch In and enter the number of switch inputs to be added.

8. Finally, click OK.

9. You still need to define the triggers to be executed through it:

• Right-click one of the switch entries and select Properties.

• In field On close and On open enter the remote indexes of the triggers to be executed. At a value of 0 no trigger is assigned. See also Creating triggers.

Close the dialog by clicking OK.

10. In column Activate put a checkmark for all switching inputs you have added. After enabling the device ports by hitting F8 and closing the corresponding contacts, the assigned triggers are executed.