Before you can register the US-223 with Wings Vioso RX you need to install the software for the Audio Controller Tascam US-224.
Click one category 
Devices in the Media Pool.
Right-click some free space in the Media Pool and select Add port 
Controller Tascam US-224/428.
For MIDI input and MIDI output select US-224 Control and place a checkmark next to Enable control of Platinum functions.
If setting US-224 Control cannot be selected, Tascam US-224 has not been detected by the computer yet. Restart your computer and make sure that the USB LED at the Tascam is on.
The settings for the LED flash rhythm can be left as they are. Finally, click on OK.
To be able to use the US-224 audio outputs, they must be selected under Options – Global Options – Sound cards.
If you want to add live microphone sound to the soundtrack, you need to press key Input Monitor on the device (LED lights up). Fader 1 is then allocated to the microphone.
When you have done all the settings you can use the Tascam US-224 as described under Remote Control using Tascam US-224.
You can also use Tascam US-224 for controlling any devices and for recording control data. See Control via external input devices.
If you want to use the Tascam US-224 MIDI inputs and outputs in Wings Vioso RX, you need to create a MIDI port and select US-224 Port 1. See also MIDI configuration.
Tascam US-224 makes certain demands to the USB controller. Open Host Controllers are known to have caused problems in this context. Further information can be found in your Tascam US-224 Manual under System Requirements.